.. DO NOT EDIT. .. THIS FILE WAS AUTOMATICALLY GENERATED BY SPHINX-GALLERY. .. TO MAKE CHANGES, EDIT THE SOURCE PYTHON FILE: .. "examples/atomistic/3-atomistic-model-with-nl.py" .. LINE NUMBERS ARE GIVEN BELOW. .. only:: html .. note:: :class: sphx-glr-download-link-note :ref:`Go to the end ` to download the full example code. .. rst-class:: sphx-glr-example-title .. _sphx_glr_examples_atomistic_3-atomistic-model-with-nl.py: .. _atomistic-tutorial-nl-md: Creating models that use neighbor lists ======================================= .. py:currentmodule:: metatensor.torch.atomistic This tutorial demonstrates how to create an atomistic model that requires a neighbor list, and use it to run MD simulations. This tutorial assumes knowledge of how to export an atomistic model and run it with the ASE calculator. If you haven't read the corresponding examples, please refer to :ref:`atomistic-tutorial-export` and :ref:`atomistic-tutorial-md`. As depicted below, one or more neighbor lists will be requested by the model, computed by the simulation engine and attached to the :py:class:`Systems`. The :py:class:`Systems` with the neighbor list is then passed to the model. .. figure:: ../../../static/images/nl-dataflow.* :width: 600px :align: center The simulation engine computes the neighbor lists for the model, which then uses them to predict outputs. This figure is a subset of the figure in :ref:`model-dataflow`. As example, we will run a 1 ps short molecular dynamics simulation of 125 already equilibrated liquid argon atoms interacting via Lennard-Jones within a cutoff of 5 Å. The system will be simulated at a temperature of 94.4 K and a mass density of 1.374 g/cm³. In the end, we will obtain the pair-correlation function :math:`g(r)` of the liquid. .. GENERATED FROM PYTHON SOURCE LINES 33-66 .. code-block:: Python from typing import Dict, List, Optional # tools for analysis import ase.geometry.rdf # tools to run the simulation and visualization import ase.io import ase.md import ase.neighborlist import ase.visualize.plot import chemiscope import matplotlib.pyplot as plt # the usual suspects import numpy as np import torch from metatensor.torch import Labels, TensorBlock, TensorMap from metatensor.torch.atomistic import ( MetatensorAtomisticModel, ModelCapabilities, ModelMetadata, ModelOutput, NeighborListOptions, System, ) # Integration with ASE calculator for metatensor atomistic models from metatensor.torch.atomistic.ase_calculator import MetatensorCalculator .. GENERATED FROM PYTHON SOURCE LINES 68-73 The simulation system ---------------------- We load the pre-equilibrated :download:`liquid argon system from a file`. .. GENERATED FROM PYTHON SOURCE LINES 74-77 .. code-block:: Python atoms = ase.io.read("liquid-argon.xyz") .. GENERATED FROM PYTHON SOURCE LINES 78-82 The system was generated based on a 5x5x5 supercell of a simple cubic (sc) cell with a lattice constant of a = 3.641 Å. After initialization of the velocities, the system was run for 100 ps with the same parameters we will use below and the final state can be visualized as .. GENERATED FROM PYTHON SOURCE LINES 83-89 .. code-block:: Python ax = ase.visualize.plot.plot_atoms(atoms, radii=0.5) ax.set_xlabel("$\\AA$") ax.set_ylabel("$\\AA$") plt.show() .. image-sg:: /examples/atomistic/images/sphx_glr_3-atomistic-model-with-nl_001.png :alt: 3 atomistic model with nl :srcset: /examples/atomistic/images/sphx_glr_3-atomistic-model-with-nl_001.png :class: sphx-glr-single-img .. GENERATED FROM PYTHON SOURCE LINES 90-91 The system already has velocities and the expected density of 1.374 g/cm³. .. GENERATED FROM PYTHON SOURCE LINES 92-100 .. code-block:: Python u_to_g = 1.66053906660e-24 Å_to_cm = 1e-08 mass_density = sum(atoms.get_masses()) / atoms.cell.volume * u_to_g / Å_to_cm**3 print(f"ρ_m = {mass_density:.3f} g/cm³") .. rst-class:: sphx-glr-script-out .. code-block:: none ρ_m = 1.374 g/cm³ .. GENERATED FROM PYTHON SOURCE LINES 101-115 Metatensor's neighbor lists --------------------------- .. note:: The steps below of creating a neighbor list, wrapping it inside a :py:class:`TensorBlock ` and attaching it to a system will be done by the simulation engine and must not be handled by the model developer. How to request a neighbor list will be presented below when the actual model is defined. Before implementing the actual model, let's take a look at how metatensor stores neighbor lists inside a :py:class:`System` object. We start by computing the neighbor list for our argon systen using ASE. .. GENERATED FROM PYTHON SOURCE LINES 116-119 .. code-block:: Python i, j, S, D = ase.neighborlist.neighbor_list(quantities="ijSD", a=atoms, cutoff=5.0) .. GENERATED FROM PYTHON SOURCE LINES 120-124 The :py:func:`ase.neighborlist.neighbor_list` function returns the neighbor indices: quantities ``"i"`` and ``"j"``, the neighbor shifts ``"S"``, and the distance vectors ``"D"``. We now stack these together and convert them into the suitable types. .. GENERATED FROM PYTHON SOURCE LINES 125-134 .. code-block:: Python i = torch.from_numpy(i.astype(int)) j = torch.from_numpy(j.astype(int)) neighbor_indices = torch.stack([i, j], dim=1) neighbor_shifts = torch.from_numpy(S.astype(int)) print("neighbor_indices:", neighbor_indices) print("neighbor_shifts:", neighbor_shifts) .. rst-class:: sphx-glr-script-out .. code-block:: none neighbor_indices: tensor([[ 0, 20], [ 0, 4], [ 0, 5], ..., [124, 123], [124, 119], [124, 94]]) neighbor_shifts: tensor([[ 1, -1, -1], [ 0, 0, -1], [ 1, 0, -1], ..., [ 0, 0, 0], [ 0, 0, 0], [ 0, 0, 0]]) .. GENERATED FROM PYTHON SOURCE LINES 135-141 Creating a neighbor list ^^^^^^^^^^^^^^^^^^^^^^^^ We now assemble the neighbor list following metatensor conventions. First, we create the ``samples`` metadata for the :py:class:`TensorBlock ` which will hold the neighbor list. .. GENERATED FROM PYTHON SOURCE LINES 141-163 .. code-block:: Python sample_values = torch.hstack([neighbor_indices, neighbor_shifts]) samples = Labels( names=[ "first_atom", "second_atom", "cell_shift_a", "cell_shift_b", "cell_shift_c", ], values=sample_values, ) neighbors = TensorBlock( values=torch.from_numpy(D).reshape(-1, 3, 1), samples=samples, components=[Labels.range("xyz", 3)], properties=Labels.range("distance", 1), ) print(neighbors) .. rst-class:: sphx-glr-script-out .. code-block:: none TensorBlock samples (1356): ['first_atom', 'second_atom', 'cell_shift_a', 'cell_shift_b', 'cell_shift_c'] components (3): ['xyz'] properties (1): ['distance'] gradients: None .. GENERATED FROM PYTHON SOURCE LINES 164-169 The data and metadata inside the ``neighbors`` object do not contain information about the ``cutoff``, whether this is a full or half neighbor list, and whether it is restricted to distances strictly below the cutoff. To account for this, metatensor neighbor lists are always stored together with :py:class:`NeighborListOptions`. For example, these options can be defined with .. GENERATED FROM PYTHON SOURCE LINES 170-173 .. code-block:: Python options = NeighborListOptions(cutoff=5.0, full_list=True, strict=True) .. GENERATED FROM PYTHON SOURCE LINES 174-188 ``full_list=True`` will give us a list where each `i, j` pair appears twice, stored once as `i, j` and once as `j, i`. ``full_list=False`` would give us a half list, with each pair only stored once. Depending on your model, either of these can be more convenient or faster. ``strict=True`` will give us a list where all pairs are strictly contained inside the cutoff radius. This is always safe to do and should be your default option. ``strict=False`` can contain additional pairs that you would need to handle explicitly, either by adding a cutoff smoothing function to make the contribution of pairs outside the cutoff got to zero; or by filtering out such pairs. The advantage of using ``strict=False`` is that this will allow simulation engines to re-use the same neighbor list across multiple simulation steps, making the overall simulation faster. It is however a tradeoff, since with ``strict=False`` the model itself will have to process more pairs. .. GENERATED FROM PYTHON SOURCE LINES 191-213 With this we can, in principle, attach the neighbor list to a metatensor system using .. code:: python system.add_neighbor_list(options=options, neighbors=neighbors) To reiterate, in a typical simulation setup computing the neighbor list and attaching it to the system is done by the simulation engine, and model authors do not have to worry about it. The model can then retrieve the neighbor list with .. code:: python system.get_neighbor_list(options=options) Accessing data in neighbor lists ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Now that we have a neighbor list, we can access the data and metadata. First, we can extract the ``distances`` vectors between the neighboring pairs within the cutoff, which we can then use in our models. .. GENERATED FROM PYTHON SOURCE LINES 214-219 .. code-block:: Python distances = neighbors.values print(distances.shape) .. rst-class:: sphx-glr-script-out .. code-block:: none torch.Size([1356, 3, 1]) .. GENERATED FROM PYTHON SOURCE LINES 220-223 We can also get the metadata values like *neighbor indices* or the *neighbor shifts* using the :py:meth:`Labels.column ` and :py:meth:`Labels.view ` methods. .. GENERATED FROM PYTHON SOURCE LINES 224-233 .. code-block:: Python i = neighbors.samples.column("first_atom") j = neighbors.samples.column("second_atom") neighbor_indices = neighbors.samples.view(["first_atom", "second_atom"]).values neighbor_shifts = neighbors.samples.view( ["cell_shift_a", "cell_shift_b", "cell_shift_c"] ).values .. GENERATED FROM PYTHON SOURCE LINES 234-247 As mentioned above, in practical use cases you will not have to compute neighbor lists yourself, but instead the simulation engine will compute it for you and you'll just need to get the right list for a given :py:class:`System` using the corresponding ``options``: .. code:: python neighbors = system.get_neighbor_list(options) You can also loop over all attached lists of a :py:class:`System` using :py:meth:`System.known_neighbor_lists` to find a suitable one based on :py:class:`NeighborListOptions` attributes like ``cutoff``, ``full_list``, and ``requestors``. .. GENERATED FROM PYTHON SOURCE LINES 251-284 A Lennard-Jones model --------------------- Now that we know how the neighbor data is stored and can be accessed, and know how to use it we can construct our Lennard-Jones model with a fixed cutoff. The Lennard-Jones potential is a mathematical basis to approximate the interaction between a pair of neutral atoms or molecules. It is given by the equation: .. math:: V(r) = 4\epsilon \left[ \left( \frac{\sigma}{r} \right)^{12} - \left( \frac{\sigma}{r} \right)^{6} \right] where :math:`\epsilon` is the depth of the potential well, :math:`\sigma` is the finite distance at which the inter-particle potential is zero, and :math:`r` is the distance between the particles. The 12-6 form is chosen because the :math:`r^{12}` term approximates the Pauli repulsion at short ranges, while the :math:`r^6` term represents the attractive van der Waals forces. The :math:`r^{12}` is chosen because it is just the *square* of the :math:`r^6` and therefore allows fast evaluation. A Lennard-Jones potential is well-suited for argon because it accurately represents the van der Waals forces that dominate the interactions between argon atoms, as for all noble gases. This potential was used in one of the first MD simulations: "Correlation in the motions of atoms in liquid Argon" by A. Rahman (`Phys. Rev. 136, A405-A411, 1964 `_), which demonstrated the effectiveness of continuous potentials in molecular dynamics. The model below is a simplified version of a `more complex Lennard-Jones model `_. The linked version also implements ``per_atom`` energies as well as atom selection using the ``selected_atoms`` parameter of the ``forward()`` method. In this model, we shift the energy by its value at the ``cutoff``. This will break the conservativeness of the potential, which is unproblematic in here because we use a large cutoff and therefore the potential already almost decayed to zero. For more sophisticated methods like a polynomial switching potential like XPLOR, we refer to the literature. .. GENERATED FROM PYTHON SOURCE LINES 285-362 .. code-block:: Python class LennardJonesModel(torch.nn.Module): """Implementation of a single particle type Lennard-Jones potential.""" def __init__(self, cutoff, sigma, epsilon): super().__init__() # define neighbor list options to request the right set of neighbors self._nl_options = NeighborListOptions( cutoff=cutoff, full_list=False, strict=True ) self._sigma = sigma self._epsilon = epsilon # shift the energy to 0 at the cutoff self._shift = 4 * epsilon * ((sigma / cutoff) ** 12 - (sigma / cutoff) ** 6) def requested_neighbor_lists(self) -> List[NeighborListOptions]: """Method declaring which neighbors lists this model desires. The method is required to tell an simulation engine (here ase) to compute and attach the requested neighbor list to a system which will be passed to the ``forward`` method defined below Note that a model can request as many neighbor lists as it wants """ return [self._nl_options] def forward( self, systems: List[System], outputs: Dict[str, ModelOutput], selected_atoms: Optional[Labels], ) -> Dict[str, TensorMap]: if list(outputs.keys()) != ["energy"]: raise ValueError( "this model can only compute 'energy', but `outputs` contains other " f"keys: {', '.join(outputs.keys())}" ) # we don't want to worry about selected_atoms yet if selected_atoms is not None: raise NotImplementedError("selected_atoms is not implemented") if outputs["energy"].per_atom: raise NotImplementedError("per atom energy is not implemented") # Initialize device so we can access it outside of the for loop device = torch.device("cpu") for system in systems: device = system.device neighbors = system.get_neighbor_list(self._nl_options) distances = neighbors.values.reshape(-1, 3) sigma_r_6 = (self._sigma / torch.linalg.vector_norm(distances, dim=1)) ** 6 sigma_r_12 = sigma_r_6 * sigma_r_6 e = 4.0 * self._epsilon * (sigma_r_12 - sigma_r_6) - self._shift samples = Labels( ["system"], torch.arange(len(systems), device=device).reshape(-1, 1) ) block = TensorBlock( values=torch.sum(e).reshape(-1, 1), samples=samples, components=torch.jit.annotate(List[Labels], []), properties=Labels(["energy"], torch.tensor([[0]], device=device)), ) return { "energy": TensorMap( Labels("_", torch.tensor([[0]], device=device)), [block] ), } .. GENERATED FROM PYTHON SOURCE LINES 363-382 In the model above, in addition to the required ``__init__()`` and :py:meth:`ModelInterface.forward` methods, we also implemented the :py:meth:`ModelInterface.requested_neighbor_lists` method, which declares the neighbor list our model requires. Running the simulation ---------------------- We now define and wrap the model, using the initial positions and the Lennard-Jones parameters taken from `Méndez-Bermúdez et.al, Phys. Commun. 2022 `_. .. note:: The **units** of the Lennard Jones parameters from the reference are in ``"Angstrom"`` and ``"kJ/mol"``. We declare the (energy) ``unit`` and ``length_unit`` accordiningly when defining the :py:class:`ModelCapabilities` object below. From then on, metatensor is taking care of the correct unit conversion when the energies and forces are passed to the simulation engine. .. GENERATED FROM PYTHON SOURCE LINES 383-409 .. code-block:: Python sigma = 3.3646 # Å epsilon = 0.94191 # kJ / mol model = LennardJonesModel( cutoff=5.0, sigma=sigma, epsilon=epsilon, ) capabilities = ModelCapabilities( outputs={ "energy": ModelOutput(quantity="energy", unit="kJ/mol", per_atom=False), }, atomic_types=[18], interaction_range=5.0, length_unit="Angstrom", supported_devices=["cpu"], dtype="float32", ) wrapper = MetatensorAtomisticModel(model.eval(), ModelMetadata(), capabilities) # Use the wrapped model as the calculator for these atoms atoms.calc = MetatensorCalculator(wrapper) .. GENERATED FROM PYTHON SOURCE LINES 410-414 We'll run the simulation in the constant volume/temperature thermodynamic ensemble (NVT or Canonical ensemble), using a Langevin thermostat for time integration. Please refer to the corresponding documentation (:py:class:`ase.md.langevin.Langevin`) for more information! .. GENERATED FROM PYTHON SOURCE LINES 415-432 .. code-block:: Python integrator = ase.md.Langevin( atoms, timestep=2.0 * ase.units.fs, temperature_K=94.4, friction=0.1 / ase.units.fs, ) trajectory = [] for _ in range(50): # run a single simulation for 10 steps integrator.run(10) # collect data about the simulation trajectory.append(atoms.copy()) .. GENERATED FROM PYTHON SOURCE LINES 433-434 We can use `chemiscope `_ to visualize the trajectory .. GENERATED FROM PYTHON SOURCE LINES 435-438 .. code-block:: Python viewer_settings = {"bonds": False, "playbackDelay": 70} chemiscope.show(trajectory, mode="structure", settings={"structure": [viewer_settings]}) .. chemiscope:: _datasets/fig_3-atomistic-model-with-nl_002.json.gz :mode: structure .. raw:: html


.. GENERATED FROM PYTHON SOURCE LINES 439-441 We finally compute and plot the avaregae pair-correlation function :math:`g(r)` of the recorded ``trajectory``. .. GENERATED FROM PYTHON SOURCE LINES 442-459 .. code-block:: Python rdf = [] for atoms in trajectory: rdf_step, rdf_dists = ase.geometry.rdf.get_rdf(atoms, rmax=9.0, nbins=100) rdf.append(rdf_step) fig, ax = plt.subplots() ax.plot(rdf_dists, np.mean(rdf, axis=0)) ax.set_xlabel("distance / Å") ax.set_ylabel("$g(r)$") ax.minorticks_on() fig.tight_layout() fig.show() .. image-sg:: /examples/atomistic/images/sphx_glr_3-atomistic-model-with-nl_002.png :alt: 3 atomistic model with nl :srcset: /examples/atomistic/images/sphx_glr_3-atomistic-model-with-nl_002.png :class: sphx-glr-single-img .. GENERATED FROM PYTHON SOURCE LINES 460-462 The pair-correlation function shows the usual structure for a liquid and we find the expected first narrow peak at 3.7 Å and a second broader peak at 7.0 Å. .. rst-class:: sphx-glr-timing **Total running time of the script:** (0 minutes 3.274 seconds) .. _sphx_glr_download_examples_atomistic_3-atomistic-model-with-nl.py: .. only:: html .. container:: sphx-glr-footer sphx-glr-footer-example .. container:: sphx-glr-download sphx-glr-download-jupyter :download:`Download Jupyter notebook: 3-atomistic-model-with-nl.ipynb <3-atomistic-model-with-nl.ipynb>` .. container:: sphx-glr-download sphx-glr-download-python :download:`Download Python source code: 3-atomistic-model-with-nl.py <3-atomistic-model-with-nl.py>` .. container:: sphx-glr-download sphx-glr-download-zip :download:`Download zipped: 3-atomistic-model-with-nl.zip <3-atomistic-model-with-nl.zip>` .. only:: html .. rst-class:: sphx-glr-signature `Gallery generated by Sphinx-Gallery `_